What happens to an entropy source when voltage or temperature drifts
Entropy sources drift with temperature, supply voltage and age, and they can be pushed deliberately. Drift rarely shows in the output statistics — it shows in the physical quantities the entropy model depends on, which is why a certificate issued at evaluation cannot speak for a device in service years later.
Temperature
Every physical process in a semiconductor device has a temperature coefficient. Laser threshold current, photodiode responsivity, amplifier gain and ADC reference all move with temperature, and they do not move together.
A source characterised at 25 °C and deployed in a rack at 55 °C is operating somewhere the model was not tested. It may still be sound. Whether it is, is a question of measurement rather than assumption.
Supply voltage
Rail variation shifts bias points. A laser driven marginally below threshold at nominal supply may not return fully below threshold at the low end of tolerance, and if it does not, consecutive pulses are no longer phase-independent — which is the entropy mechanism itself.
The output would look unchanged. The entropy per sample would not be.
Ageing
Semiconductor lasers degrade slowly and predictably: threshold current rises over operating hours. Over a deployment measured in years, a device that started comfortably inside its envelope can drift toward its edge.
This is the case that most clearly defeats one-time characterisation. The device passed evaluation, and it is now different from the device that passed.
Deliberate interference
A source in a physically accessible device can be pushed: heated, undervolted, or exposed to injected signals. The attacker's goal is not to stop it — a stopped source is detected — but to reduce its entropy while keeping the output plausible.
That attack is defeated by measuring the physical parameters rather than the output, because reducing entropy while holding every physical quantity at its modelled value is a far harder problem than reducing entropy alone.
The conclusion this forces
None of these appear reliably in statistical tests, and all of them invalidate an entropy estimate. A static certificate describes a device that no longer exists in quite the same form. Continuous measurement of the model's quantities is the only thing that keeps the claim current.
Keep reading
- Assurance and measurement
What is entropy assurance?
Entropy assurance is the combination of three things: a physical model of where unpredictability originates, measurement of the quantities that model depends on while the system runs, and evidence a third party can inspect. Any two without the third leaves a gap somebody will eventually ask about.
- Assurance and measurement
Health tests at runtime, what continuous monitoring looks like
SP 800-90B mandates two continuous health tests — repetition count and adaptive proportion — which detect a source that has stopped or stuck. Detecting a source that has merely degraded requires monitoring the physical quantities the entropy model depends on, at a cadence fast enough to act on.
- Assurance and measurement
Measuring min-entropy in a physical source
Measuring min-entropy in a physical source means collecting long raw sample sequences under controlled conditions, applying the SP 800-90B estimators, and taking the minimum they return. The result is conditional on the model of the source, so the conditions and assumptions are part of the measurement rather than context for it.