Skip to content
Technical centre

Everything an evaluation needs.

Datasheets, drivers, integration guides, reference designs and certificate scope, by product family — and how to get each one.

Documentation

By product family.

The same photonic engine appears at several integration points, so much of the assurance work carries across the family. Interfaces, environmental envelopes and certificate scope do not.

Garnet™ Plus A41

PCIe Gen2 ×4 · low-profile

The PCIe entropy card for servers, security appliances and data centre equipment, and the usual starting point for an OEM qualification.

Garnet™ Plus A41 documentation, what each item covers, and its availability
DocumentWhat it coversAvailability
Product datasheetInterface, throughput up to 1 Gbit/s, mechanical and environmental limits, health-state reporting, ordering information.On request
Linux C and Python driversHost drivers supplied with the product and with evaluation units, including the interfaces used to read the entropy stream and the device health state.Ships with product
Host integration guideDevice enumeration, delivery of entropy into the host cryptographic stack, seeding and reseeding considerations, and how to surface health state to operations.On request
Certificate documentationNIST SP 800-90B entropy certificate E178 — scope: Quside PCIe One and FMC One — and the ENS Alta qualification for the same two products, packaged with the scope statements an auditor will ask for.On request

Nellite™ Plus A41

FMC LPC/HPC · FMC+

The FMC module for FPGA-based systems, where form factor, control and observability all matter — defence, space and secure communications.

Nellite™ Plus A41 documentation, what each item covers, and its availability
DocumentWhat it coversAvailability
Product datasheetFMC LPC/HPC and FMC+ interface, throughput up to 1 Gbit/s, mechanical and environmental limits, health-state reporting.On request
VHDL IP coresThe FPGA-side cores supplied with the product for direct integration into a carrier design.Ships with product
FPGA integration guideCarrier board bring-up, clocking and constraints, reading the entropy stream and the health state from fabric, and where the source sits relative to the system trust boundary.On request
Certificate documentationNIST SP 800-90B entropy certificate E178 — scope: Quside PCIe One and FMC One — and the ENS Alta qualification for the same two products.On request

Onyx™ S1

Compact embedded module

The compact embedded module built on Ruby™ S1, at 50–100 Mbit/s, for platforms with no room for a PCIe card or an FMC module.

Available — first units shipped to defence customersProduct detail
Onyx™ S1 documentation, what each item covers, and its availability
DocumentWhat it coversAvailability
Product datasheetModule dimensions, host interface, throughput of 50–100 Mbit/s, power envelope, environmental limits and health-state reporting.On request
Embedded integration guideHost interface bring-up, entropy delivery into a platform root of trust or secure boot flow, and reading the device health state from a constrained host.On request
Assurance statementWhat Onyx™ S1 shares with the certified platforms and what it does not. E178 is scoped to Quside PCIe One and FMC One; Onyx sits outside that scope and should not be quoted as if it were inside it.On request

Ruby™ chips

N1 photonic chip · S1 VCSEL

The entropy engines underneath the product families. Ruby™ N1 uses quantum phase diffusion on a monolithic photonic chip, built with US and European foundry supply; Ruby™ S1 uses polarisation switching from a VCSEL.

N1 and S1 in productionProduct detail
Ruby™ chips documentation, what each item covers, and its availability
DocumentWhat it coversAvailability
Silicon briefThe physical mechanism of each engine, the measurement model it is assessed against, and the integration options for an OEM design.On request
Space qualification evidence (N1)Qualification evidence supporting operation in GEO conditions. Programme-specific, so it is released under agreement and confirmed with the programme team before it is cited in a bid.Under NDA
Drivers and software

What is in the box.

Every package ships with the product and with evaluation units, matched to the hardware revision it was tested against.

Drivers and software supplied with each product family, and their availability
DocumentWhat it coversAvailability
Linux C driverHost driver for the Garnet™ PCIe family. Supplied with the product and with evaluation units.Ships with product
Python bindingsPython interface over the same driver, for evaluation, test harnesses and qualification scripting.Ships with product
VHDL IP coresFPGA-side cores for the Nellite™ FMC family, for direct integration into a carrier design.Ships with product
Embedded host interfaceInterface documentation for the Onyx™ embedded line, including the health-state reporting path.On request

Each package exposes the entropy stream and the device health state, so your host can check whether the source is inside its validated operating conditions before it seeds or reseeds.

Integration guides

From bring-up to audit pack.

Describe the system you are integrating into and we send the relevant guide.

Integration guides, what each one covers, and its availability
DocumentWhat it coversAvailability
Host integration — PCIeEnumerating the card, reading the entropy stream, delivering it into the host cryptographic stack, and exposing health state to operations and audit.On request
FPGA integration — FMCCarrier bring-up, clocking and constraints, and consuming both the entropy stream and the health state from fabric.On request
Embedded integrationBringing a compact module up on a constrained host, and wiring it into a secure boot or platform root-of-trust flow.On request
Reference designs

Start from a working integration.

Tell us the platform you are designing — appliance, data centre, FPGA carrier or embedded host — and we send the closest reference material and put an engineer on the questions it does not answer.

Ships with product

Supplied with the hardware

  • VHDL IP cores for the Nellite™ FMC family — a working reference integration for an FPGA carrier design.
  • Linux C and Python drivers for the Garnet™ PCIe family, including the interfaces used to read entropy and health state.
  • Direct support from the engineering team for the duration of an evaluation.
Certificates

What each certificate covers.

The scope wording to quote, per scheme, with the products and versions each result was granted against.

Certificates and qualification evidence, what each one covers, what it does not establish, and its status
SchemeScopeWhat it does not coverStatus
NIST SP 800-90B
Entropy certificate E178
Quside PCIe One and FMC One.Validates the entropy source. It does not validate a complete random bit generator, and it does not cover the systems built on top of it.Held
ENS
Alta
Quside PCIe One and FMC One, version 1.0, under one CCN-CERT catalogue entry.Covers Quside PCIe One and FMC One at version 1.0. Alta is the top of the three ENS categories, so it carries the two below it.Held
Space qualification
Ruby™ N1
Qualification evidence supporting operation in GEO conditions.Programme-specific. Confirm current status with the programme team before citing it in a bid.Programme evidence

Certificate documentation packaged for an audit — scope statements, the standards mapping behind them, and the health-state evidence a device produces at runtime — is sent on request. What it establishes is quantified entropy within a defined physical model, and continuous visibility into entropy-source health for as long as the part is in service.

Ask for the document you need.

Tell us the interface, the throughput, the environment and the assessor you are answering to. An engineer replies with the material and the scope statements behind it.